iHackintosh

Jailbreak your iPhone

Jailbreak and unlock iPhone 3.0.1

Advertisements

Advertisements

Tags: , , , , ,

Comments ( 20 )

Have Something To Say ?

  1. JNorman September 28, 2009 Reply

    hello. what version of itunes is required to jail break iphone 3G with 3.0.1 os …

  2. AQ September 12, 2009 Reply

    Hi All
    I scratch loaded my Iphone 2G. After that I upgraded it to 3.0.1. Now when I use the RedSn0W_Win_0.8 with Bootloaders 3.9 and 4.6, it displays “Downloading Jailbreak Data…” for almost 15 minutes and then still does not unlock the phone. I can only do S.O.S. calls. Can some one help me about it?
    Also, how can I get my basic softwares e.g, browser,maps,weather, calc etc back?
    Appreciated,
    Regards
    AQ

  3. George Alex September 11, 2009 Reply

    I had the same problem with the reboot. Then I found a very helpful tip in Youtube where a guy told me to unplug the iPhone (mine is 2G) and plug it in back in 3 secs in DFU mode. It worked great and I had it jailbroken and unlocked. I can make all the calls I want but people can’t reach me quite often. It says that my phone is switched off even though it isn’t. And I have a REAL battery problem – it’s gone in a couple of hours. Any help with that? 10x

  4. George Alex September 11, 2009 Reply

    I had the same problem with the reboot. Then I found a very helpful tip in Youtube where a guy told me to unplug the iPhone (mine is 2G) and plug it in back in 3 secs. It worked great and I had it jailbroken and unlocked. I can make all the calls I want but people can’t reach me quite often. It says that my phone is switched off even though it isn’t. And I have a REAL battery problem – it’s gone in a couple of hours. Any help with that? 10x

  5. Bj the Dj September 4, 2009 Reply

    Dear!

    i dont know wht the hell is wrong with my 2g. i hav done all the redsnow again n again, even i hav restored my iphone for more then a 100 times but still at the end, its “waiting for reboot”,

    i need serious help

  6. Amzzz September 2, 2009 Reply

    I’ve done all the jailbreaking and installed ultrasn0w, however when i put another network sim card it shows the network but i cant get the phone activated. It comes up with the emergency screen. I’ve restored and tried it like 5 times and have had no luck. Any help??

  7. cheky August 29, 2009 Reply

    i had upgraded my 2G iphone with new 3.0.1 but now when i am tryin to unlock my phone with redsnow 0.8 it says ipsw not found ….
    please help i have been tryig to fix this problem since 1 week
    i tried with redsnow 7.2.
    tried with 3.0 ipsw also
    nothing seems to be working
    pleaes help

  8. Raudha August 28, 2009 Reply

    Hi

    i have same problem with DSHan and i’ve already choosed the less option,just check the cydia not the icy,,one of them
    but it’s still showing same thing

    “waiting for reboot”

    but it is not processing at all, i’ve already waited all night long

  9. mowbs August 28, 2009 Reply

    i have iphone 3gs firmware 3.0.1 and using purplera1n to jailbreak,it goes into recovery mode and i get the pic of(whoever he is) but it just wont reboot.ive also tried redsn0w and it wont find the file i downloaded to reboot,any suggetions?i must be a proper muppet coz ppl say they have done this in 7 mins,pulling my hair out big time

  10. Tigersharkbarn August 24, 2009 Reply

    Hi

    I have 2G and is this jailbreak for AT&T in US only? I tried the redsn0w and it bricked my 2G. Thanks.

  11. soulsplinter August 20, 2009 Reply

    I unlocked my iphone 2G to and its upgraded to 3.0.0 then i upgraded to 3.0.1 then it was showing “Sim not supported”
    i tried to unlock it.But by my mistake it i used the qrong image ( am not sure)..then i tune was showing “Waiting to Reboot” for a long time.
    Then i restored using iphone. Again itune is showing “Sim not supported”

    Now the problem is iphone is not switching off. I dont know what went wrong..is it hardware probelem ?
    or is it problem with the image i used during unlocking ?

    Please help ….

  12. Johnny Guru August 19, 2009 Reply

    This how to post has explained to me the difference that i was looking for that other sites completely miss. This on actually gives you the option to download the right downloads for the right model iphone you have. Its awesome if you cant do a jailbreak/unlock on an iPhone with the instructions from here then you might as well leave it to someone else that knows what they are doing, the directions explained here couldnt be any easier. thx alot for your help.

  13. iTree August 18, 2009 Reply

    Works perfect thanx dev team… Bit off topic… but Im having trouble with unresponsive touch screen and i have to respring for it to work… and no I don’t think its a hardware problem because its the whole screen and restoring the phone takes the problem away for a while, until it just creeps up again, almost as if the phone memory gets sluggish….. any help would be much appreciated thanx
    treeleaf43@gmail.com

  14. david gibbons August 12, 2009 Reply

    hi all,
    ive been trying to activate/jailbreak/unlock my iphone 2gen for a while now. i was on O2 payasyougo but now im on vodafone. when i download the 3.0 software, redsnow will NOT recognise it as iphone software.
    thanks for any help.

  15. Akif August 8, 2009 Reply

    hi! frds how are you i will be doing iphone unlocking this is illegal legal i want this anwser plz reply me……..lucky_bobby2010@yahoo.com

  16. Drew August 7, 2009 Reply

    DShan: I had the same problem. It would say it was installing on the program but it would just sit there and sit there and sit there…

    Try uninstalling iTunes 8.2 and downgrading to an older version, maybe 7 or so. You can find guides on how to do so elsewhere. Make sure to back-up your files before you downgrade as your iTunes libraries won’t be compatible. Once you get it back to version 7, run the program to unlock/jailbreak your iPhone and it should move past that last screen when it says jailbreaking or whatever. Your iPhone will come on and say it’s Jailbreaking.

    Hope this helps.

  17. S2 August 7, 2009 Reply

    Are you using RS 8? Try an earlier version. 8 does not work for me, but previous version does.

  18. Chris August 6, 2009 Reply

    Hello, I have spent most nights for a week trying to unlock my 2G iPhone and was getting nowhere. Came across your redsn0w instructions and 30 mins later it’s done, with vista by the way. What can I say …. I’m very grateful. Chris

  19. randomnonindiandude August 4, 2009 Reply

    @dshanahan,
    by reboot I’m assuming you mean the point redsnow(whatever it’s called they all follow the same principle, you upload the OS after wiping, longest process) reboots iphone and you see a harddrive image(the tool should allow you to select cydia, installer, icy whatever) keep selecting lesser items e.g, select unlock but not cydia, select cydia but not icy… That should work.

  20. DShan August 3, 2009 Reply

    I’m having trouble; I follow these instructions (and the ones on the Dev Team Blog) and I get to the reboot and the phone doesn’t reboot.

    I’ve tried disconnecting it per some commenter’s advice, didn’t work. No matter how many times I try I can’t get the redsn0w to work in full.

    Any ideas?

    D
    @dshanahan

Leave your comment here