Sucessful iPC 10.5.6 Installations.

18 February 2009 by Vinay 27 Comments

iPC is the most advanced OSX86 distro from the house of PCWIZ. iPC comes in two flavours one is iPC 10.5.6 universal and second one is iPC X – DL which is a live DVD version but it comes in Dual Layer DVD. This post is dedicated to iPC 10.5.6 here we list successful configuration for iPC 10.5.6 You can also contribute into this post by leaving a comment below.If you have any question just leave a comment below.Before reading this post you should take a look at Complete Driver List included into iPC 10.5.6, Features of iPC X – DL 10.5.6, Comprehensive guide on dual boot Vista and OSX86 and a handy FAQ for newbees to OSX86.

System 1 : - Gigabyte GA-EP43-S3 + Intel Core 2 Duo + 2 GB DDR2 800 FSB Ram + NVIDIA 8800.

Customization Selection : – Kernel >>> Default Vanilla

Intel ICH10-SATA Support ► For Motherboard Chipset.

AppleSMBIOS-27 Rev3 800 MHZ. ► For DDR2 800 RAM

Legacy Jmicron ► Jmicron Patch

ALC 888 ► Audio

RT 1000 ► Lan

Ndarwin 512mb ► Graphics

Patched USB Driver ► USB driver

PS2 Keyboard Fix. ► Patching Keyboard fix

System 2 : - Asus P5LD2 SE + Intel Core 2 Duo + NVidia GeForce 8800 GTX 320MB.

Customization Selection : – Kernels ► 9.5.0 Voodo Kernel ► Seatbelt.kext 10.5.5

LegacyApplelntelPIIXATA ► For ICH 7

AD1986 or Azalia ► For Sound

Patched USB Drivers ► For the USB

lOPCIFamily.kext patched and lOPCMCIAFamily ► For PCI Adappters

IntelCPUPMDisabler ►

PS/2 Keyboard Fix ► For keyboard patch

AppleSMBIOS AnV MacPro►

System 3 : - nForce 730i EVGA + Intel Core 2 Quad Q6700 + 4GB 800Mhz RAM + GPU e-GeForce 8500 GT.

Customization Selection : – Kernel >>> Default Vanilla

NVdarwin 1024MB ► Graphic

jMicronATA ► for JMicron IDE

Azalia Audio ► Audio

ACPI Fix ►

CPUS=1 One Core Fix ►For Quad Core

FireWire Mount Fix ►

SATA Drive Icon Fix ►

lOPCIFamily.kext patched►

lOPCMCIAFamily ►

Shutdown/Restart Fix ►

Verbose Mode ►

AppleSMBIOS-27 Rev3 800MHz ► For DDR2 800 Ram

System 3 : – HP Pavilion ZD8044ea { HP Pavilion ZD8000 Series }

Customization Selection : – Kernel >>> 9.5.0 Voodoo Kernel ► Seatbelt.kext 10.5.5

► LegacyAppleIntelPIIXATA

► AC97 Audio

► Realtek R1000

►Broadcom Driver

►PS/2 Keyboard Fix

► Patch DSDT

More Info : Apps I installed a few things avoiding anything which seemed AMD specific. NTFS 3-G + MacFUSE I reccomend.Wireless, Internet and Sound all worked after going through apples initial setup procedures. Software Update worked without a hitch Also had the video resolution and QE/CI enabled by follwing flashGX’s guide.

http://www.insanelymac.com/forum/index.php…=129619&hl=

Tested n Confirmed by < Jabb3r >

27 Comments »

sunny said:

any way to install iPC on intel 945 motherboard?
my pc spec. are

intel core 2 duo 1.8 ghz
intel 945 gccr motherboard
intel gma 950 graphics
2.5 gb ddr2 ram
160 gb sata hd..

if anyone knows hot to intall it on 945 motherboard then plz send me the method on my email: sunnyplayboy71@gmail.com

# 22 February 2009 at 7:18 pm

AF said:

hi, i can get it to work on my PC.

when ever i try to install it, it get where it says
vesa v3. 14 MB nvidia and then something is loading then restart the PC by it self.

i am running

Motherboard : ASUS P5Q SE2

VIDEO CARD : nvidia geforce 9500 GT * GF 9500GT 550M 512 MB DDR3 . DUAL DVI TV PCI-E

processor Intel(R) core(TM)2 quad CPU Q9300 @ 2.50GHz

Memory (RAM): 8.00 GB * i tried 2GB it still didn’t work

System type: 64-bit Operating System vista*

I HAVE TWO DDRIVE A 500 GB AND A 150 GB

please help…

# 27 February 2009 at 2:18 am

dennis said:

acer aspire 8920g..which drivers?
thanks, dennis

# 1 March 2009 at 4:48 pm

agucaps said:

hey, i’ve had some trouble with this release package. i succefully installed it but there is something wrong with boot loader. i dont know why. Previusly i installed kalway 10.5.4 and it works great. i think maybe there is something to be with Chameleon boot loader. but i cant fix it.

# 9 March 2009 at 5:26 pm

Claudius139 said:

Really need some help, confused as hell!

What is the best config (vanilla? chameleon? Voodoo?) and drivers config for:

Asus P5L-MX, Core 2 Duo CPU with a Nvidia 8800GT, no dual boot, plain OSX

Audio is ADI1986, Lan is Attansic L1

What options to check??? USBPatch? lOPCIFamily? DSDT??

Please please help!

# 10 March 2009 at 8:35 pm

Ryshak said:

Did Anyone test on Dell Optiplex 740 (AMD)… I’ve install sucessfull IPC 10.5.6 , but it’s not support sound, lan, chipset…

How can i install ? Please help me !

# 17 March 2009 at 9:41 am

Batouhan said:

My pc configuration is:
P4 HT 2.8 Ghz 478 SOCKET
3GB 400 Mhz DDR RAM
Abit AI7 i865PE Chipset Mainboard
——
I finished the installaton but when starts to boot from HDD the pc restarts, when i typing “-v” for verbose
“Please contact the Voodoo Kernel Dev-team……
panic (cpu 0 caller 0×00209500): nfs_boot_init failed with 6/n “0/voodookernel/xnu-1228.7.58/bsd/nfs/nfs_vfsops.c:851
Debugger called:
.
.
.
.
BSD PROCESS NAME CORRESPONDING TO CURRENT THREAD: KERNEL_TASK

# 21 March 2009 at 9:40 pm

Miker said:

Spent several hours trying to install it on an Asus P5K with no luck. Tried every kernal one after the other but nothing. Please sen me a message if you have any luck.

# 22 March 2009 at 8:36 am

Ahmet said:

Pc Configuration is;

Asus A8V-E Mainboard
AMD Athlon 64 3000 Cpu
Geforce 6200 Vga
80Gb Ide Hdd (disabled sata)

Kernel Voodoo
ACPI Fix
Seatbelt Fix
Usb fix

After installation spend some time to modify onboard Marvel Yukon Ethernet for network, restart, shutdown fixes os works great now,
just monitor’s native resolution is 1440×900 but os x have 1400×1050 going to fix this looking for solution.

# 27 March 2009 at 1:07 pm

Ahmet said:

Miker i did same mistake install any kernel but no success at the end check the hcl and replace the parts (mainboard) works fine now.

# 27 March 2009 at 1:10 pm

Baja said:

hi, i get it to work on my old AMD system.
all work like charm.

my configuration is;

mobo: Gigabyte GA-K8NS Ultra-939
cpu: AMD Athlon 64 3000+
vga: Saphire Ati Radeon x1650 Pro
160 Gb SATA HDD
1Gb 333 Mhz DRAM

kernel Voodoo 9.5.0
Seatbelt Fix
AC97audio

VGA Display:
Resolution: 1280 x 1024 @ 85 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Quartz Extreme:Supported
QuartzGL: Supported

Big thx goes to PCWIZ team

# 31 March 2009 at 7:46 pm

Grab485 said:

@ Miker: I have successfully installed retail Leopard 10.5.6 system onto my Asus P5K mobo. I used “boot132″ method. It works just fine. Even Audio (ALC883, Stereo output and Mic) and Gigabit Ethernet (AttansicL1).

This is boot132 iso image for this board. ~17Mb. Enjoy!
http://rapidshare.com/files/218455564/ASUSP5K.iso.html
MD5: 4C0905713F109C976B9F17812F788142
MoBo: Asus P5K CPU: Intel Core2Quad 6600 RAM: 4 x 1Gb
Video: Asus NE8800GT 512MB DVD: SATA HDD: SATA

@ AF:Try different videocard. Even simple old PCI one might help.Switch off all the periferal in BIOS. Use SATA HDD and DVD.

# 7 April 2009 at 4:37 pm

Mike said:

@Grab485
i cant download your file.you think u can reupload it again?
and can u explain to me how to do this properly? a little guide or so? thanks

# 18 April 2009 at 4:49 am

Grab485 said:

to Mike:

sorry for silence, I will help u a bit later.

# 7 May 2009 at 2:47 am

Grab485 said:

To Mike

Here you can download boot132.iso for ASUS P5K mobo and some useful utilities, also pinconfig text file for HDA patcher – for full working on-board ALC883 sound.

http://rapidshare.com/files/230140505/ASUS_P5K_BOOT132_stuff.rar

# 7 May 2009 at 2:34 pm

David Bishop said:

I’ve tried them all…distro’s that is…until I used “cpus=1″ at the initial boot prompt…I got nowhere. None of the other ‘switches’ or kludges worked…the iPC version 10.5.6 was best for my setup:

Dual Core Pentium
1 IDE HD
1 SATA HD
1 IDE DVD
In bios, Sata to follow Pata, however, chose Sata drive to follow DVD in boot order. My Windoze version is installed on the Sata drive, then I installed easy BCD.

Next try to boot into your Mac 10+ DVD with the cpus=1 switch (no quotes needed). I tried the -s, -x, -f, -d, however I received NO kernel panics once I used the cpus=1 switch.

Remember if you’re running Win Vista/7 and you mess your MBR up…start up windows install DVD, get to a terminal and type “bootrec /fixboot”…at least you won’t have to reinstall.

Hope this helps/encourages someone.

# 9 May 2009 at 12:03 pm

asal said:

Can anyone successfully install iPC 10.5.6 on Toshiba Satellite m115-s3094???

# 11 May 2009 at 3:32 pm

Grab485 said:

2 asal

Do it! And thus you will be the first!

# 12 May 2009 at 10:19 pm

BRUT said:

Please help me to install mac os x on intel 945gccr

# 24 June 2009 at 3:55 am

kkdlik said:

I have successfully installed IPC 10.5.6 on my system:

Asus Striker 2 Extreme
Dual Nvidia 8800 GT Graphics cards
4 gigs of ddr3 1333 mhz

I used the Dual graphics card driver
and the nforce lan driver

# 4 July 2009 at 11:39 am

robbie thompsoon said:

hi there ive been trying for about 2 wees now to get mac osx installed on my hp g70-120em laptop. i havent a clue my specs but i do no my processor has sse2 + 3 support, would really thank anyone who can help me with my recent falure ( lol ) as ive tryed god no’s how many times to install mac osx and it never works. cheers HELP NEEDED ASAP.

# 6 July 2009 at 2:53 am

Theo said:

Could you guy give me these option for my system, i had installed it several times and it still got stuck.
System :

Intel P45 chipset Socket 775 Core 2 Quad 9400 ,2.66 ,PCI E2.0×16 DDR3 1333 bus, 8 CH HD Audio, Gbe Lan /8 Sata 3 gb/s/1394, Ram 4 gb, Video Geforce 9800 Gt.
Thank

# 31 December 2009 at 8:01 am

Loken Makwana said:

My PC configurations is

Intel 945 GCCR Motherboard,
Intel Core 2 duo,
Onboard 256 MB graphics card,
Realtek audio
2 GB DDR2 RAM
160 GB SATA Hard disk

# 14 April 2010 at 5:34 pm

Adiman423 said:

I am using iPC 10.5.6. Is there anyway to get it working with my rig?

Intel core 2 duo

3GB DDR2 RAM
Sapphire Radeon HD3850 512MB PCI Express
Motherboard: Foxconn 946GZ7MA 1.1 8KRS2H
Intel 946GZ or ICH7R
Realtek ALC883

# 9 May 2010 at 6:03 am

dipu said:

I have successfully install ipc 10.5.6 on my dell inspiron 1440..but sound is not coming..can u please tell me which sound driver will work properly..what should i do?

# 18 July 2010 at 12:22 am

Raj said:

Hai to all my friends…………………:)

i installed ipc 10.5.6 in my intel machine, it installed properly with out any problems.

But happen when the installation is complete i got one error msg that ” Keyboard is not connected” at here i installation was stopped, so please friends any one kindly give me any suggestion to continue my installation.

Thanks

Raj

# 30 August 2010 at 3:25 pm

honey said:

MOTHER BOARD : Intel Extreme Series Desktop Board DP45SG
PROCESSOR : Intel Core 2 Duo
MEMORY RAM : DDR3 1333
GRAPHIC CARD : NVIDIA GEFORCE 8400GS 512MB DDR2
SOUND CARD : MAUDIO 1010LT

This is my configuration. Which are the drivers and patches should I select?
Thanking you in advance.

# 31 August 2010 at 8:57 pm