CPU – Intel Pentium 4HT 2.8GHZ
Mainboard – Intel D865GLC i865P/PE/G/i848P
Memory – DDR 1G
OS – XP
I have iPC 10.5.6 Intel Amd DVD

When I install this to my pc, it goes to the final step like..OSx installing… wait for…mintus.
Then it does not show the message like ” Istall successfull.”
I tried 3-4 times. But, every time is same..
What is the problem..
Any one can let me kanow.

Thanks a lot.

config=live.plist

And press Enter to start the LiveDVD Boot. Eventually you will get to the root prompt like this:

:/ root#:

I DON’T GET THAT FAR…. after I type config=live.plist it starts to run some commands and then freezes… the last few lines are:
MAC framework successfully initialized
using 15728 buffer headers and 4096 clusters IO buffer headers
[TSC] delta:20, skipping synchronization. (CPU1)
IOAPIC: Version 0×20 Vectors 0:23
ACPI: System state [S8 S3 S4 S5] (S3)
Class “appleACPIPS2Nub” is duplicate
Duplicate class

Any idea what’s going wrong and has anyone else had this problem?
I don’t know if this makes a difference but i have used a dual layer dvd+r RW

Sweet

The best idea before installing is to check all of your chipsets and hardware, write it down so you have a reference when you start the install and you will have a better idea of what patches if any you will need.

My rig:
Asus A8v-x (939)
AMD Athlon 64 3800+
1.25 GB RAM
160GB HDD
ATI x1650 Pro AGP

While it all seems to work nicely I still have no network yet since the VIA Rhine drivers only partially work, doesn’t recognize cable being plugged in. The video is hit and miss, native drivers for mac only works for certain cards. As far as everything else. I used the apple ps/2 drivers and my mouse and keyboard work fine. I haven’t managed to get audio yet since I have a digital chip and even with it set to AC97 in bios, leopard still doesn’t see it (could be the fact that AC97 drivers weren’t available on my install version).

If you can get a good disk burned with iPC that would be your best option since there are far more driver fixes and choices than I have seen with others. There is also the fact that if you do get yours set correctly and have net access, you can use apple software update without to much hassle.

When I just install iPC OSx86 10 5 6 Universal without PS / 2 support it says “before you begin please connect your keyboard”

and when I install iPC OSx86 10 5 6 Universal With PS / 2 device support. The message dont pop up, but my keyboard and my mouse still dont work. So I cant write my name, short name so then i stucked

Please help
Thanks