iHackintosh

Jailbreak your iPhone

iDeneb v 1.4 10.5.6 Available for Download.

Advertisements

ideneb After PCWIZ the time is for Layne, Cri900 to release OSX86 10.5.6, Yes iDeneb 10.5.6 is out and available at Green Demon or Rapidshare. iDeneb V1.4 10.5.6 is supported both Intel and AMD processors with support of SSE2, SSE3. You have the option of both Chameleon and EFIV9 bootloaders. Ati Radeon 4XXX series is still missing although the distro has a large number of driver support. This release of iDeneb is optimized for netbooks including Acer Aspire A150, Samsung NC10 and MSI Wind. Lets take a quick look at the final release.

 

 

Warnings!

  • Do Not Install the iDeneb Base System over an existing Base System! This could cause the failure of the installation! To always execute a fresh install;
  • Do Not Select more than one a drivers of the same type! For example, Do not select 2 Audio Drivers or 2 SMBIOS, this will in many cases cause the install to fail;
  • Vanilla 9.6.0 is default kernel;
  • If you have based on AMD and/or SSE2 you must select an alternative kernel, advised kernel voodoo 9.5.0;
  • If you use kernel Voodoo you don’t select the AMD Patch ;
  • If  you use Voodoo Kernel you must select “Seatbelt Fix” under fix for resolve the problem of mount of an .dmg,.iso or .cdr;
  • If you select AppleBCM5784M_5787M and of the restart don’t work, you could try with the package that there are in the Root of your System Partition;
  • If your system’s sound does not work even after installing the proper sound drivers there may be an issue with the System Preferences. Go to System Preferences Sound > Output > and make sure that “Internal Speakers” is chosen and not Headphones or something else;
  • If you have a NVidia Video Card you don’t select more than a injector. You can choice or NVinject, or NVKush, or NVdarwin;
  • If you have a problem with ACPI_SMC_PlatformPlugin.kext you can select ACPI_SMC_Fix under Fix Menu;
  • If you have a compatible system you can select ACPI Kext 10.5.6, under Alternative Essential Patch Menu, and are original ACPI Kext from 10.5.6;
  • If you have kernel panic and you don’t know what caused it, boot in verbose mode ( -v boot flag at the F8 boot prompt ) for visualize the error;
  • If you don’t know like resolve the error you can try install only based system  with essential drivers ( Ex. Chipset Drivers ) without the “extra” drivers;
  • In some situations for the first boot it could be necessary to start with the flag – f for load the kext correctly;
  • If you haven’t select Video Drivers it could be necessary to start with flag -x;
  • If you are installing iDeneb on one of the Netbook in list, not to select no other drivers or patch;
  • Netbook Section  is in update, for problem o for add others netbook to write on the official forum in section Netbook; 


Changelog v1.3 to v1.4:
This version include Mac OS X 10.5.6 and latest update.

  • Fix CarbonLib Error;
  • Resolve the problems of speed to the boot;
  • Added Chameleon 1.0.12 with PCEFI9;
  • Added About This Mac Fix;
  • Added AppleSMBIOSEFI.kext by Default for use original AppleSMBIOS.kext;
  • Added Disabler.kext for excute the system update by Software Update;
  • Replaced dsmos.kext with AppleDecrypt.kext;
  • Update ID list of NVidia Video Card with support for 9xxx Series ( for more info, visit the site );
  • Essential System has been set up like optional
  • ACPI-Fix Integrated;
  • Fix Error on “ACPI_SMC_PlatformPlugin.kext”  during the dvd boot;
  • Added more ID Device in AppleVIAATA.kext ( for more info, visit the site );
  • Removed AppleGenericPCATA from VIA/SiS/Marvell/Uli ( Old VIA-SB ) for blocked of 128 Gb in the Hardisk andAdded AppleGenericPCATA.kext as Optional Driver;
  • Added ATIATA for ATI Chipset;

Kernel:

  • 9.6.0 Vanilla               (Intel/SSE3) – Default
  • 9.5.0 Voodoo              (Intel/AMD/SSE2/SSE3)
  • 9.2.0 Sleep                  (Intel/AMD/SSE2/SSE3)
  • 9.2.0 SpeedStep          (Intel/AMD/SSE2/SSE3)
  • 9.2.2 SSE3                   (Intel/AMD/SSE3)

Chipset:

  • ATIATA
  • AppleNForceATA
  • AppleNForceATA Test
  • MCP67
  • ICHx Fixed
  • JMicronATA
  • SAS
  • SiliconImage
  • VIA/SiS/Marvell/Uli ( Vecchio VIA-SB )
  • AppleGenericPCATA
Pin It

Advertisements

Tags: 10.5.6, distro, ideneb, OSX86

Comments ( 33 )

Have Something To Say ?

  1. mista b August 26, 2011 Reply

    keep getting kernel panics, just not sure which kernel for my dell mini 9, w/runcore 32gb sdd

  2. daak January 29, 2011 Reply

    hi just installed basic and all went well , but i notice i dont have a chance to set up wireless internet on it so how do i extract the needed drivers from the instillation disk? thanks

  3. Jack January 28, 2011 Reply

    will this work on a dell inspiron 1545?????? cos microsoft
    is on to me about my windows 7 copy :(

  4. JohnM January 11, 2011 Reply

    Installed v1.4 10.5.6 onto my HP D530:
    -2.8 GHz Pentium 4
    -1792 MB of RAM (according to the POST screen)
    -i865 Intel chipset
    -Broadcom Gigabit Extreme NIC

    Installed the Speedstep kernel, AD 1981 + AC’97 for audio, 5751 for ethernet, JMicron + ICHx for the chipset, “Seatbelt” for fixes, and even the wireless driver for the Belkin (in case I want it).

    EVERYTHING works perfectly. Followed the instructions on the wiki. Occasionally, it has issues shutting down, but nothing out of the ordinary.

  5. Giannis December 4, 2010 Reply

    thak you

  6. nugraha December 2, 2010 Reply

    hi i success instalations ideneb to my amd sytem but some trouble i have with driver sound via, vga onboard ati 4200 and lan realtek 8112l,, pls give solutions

    thanks

  7. Rajeev November 23, 2010 Reply

    hi…
    i hv a mini lappy detaild config. is below.
    Lan Realtek RTL8139/810x Family Fast Ethernet NIC
    M/B Mobile Intel(R) 945 Express Chipset Family
    WLAN Ralink b/g 802.11b/g Wlan
    Processor Intel Atom N270 1.6 Ghz
    RAM 1GB
    HDD 160 GB
    Graphics Intel GMA 950
    Webcam
    Can i install mac or iDeneb for my lappy????
    Plz rpl

    Thanks in Advance…

  8. James May 5, 2010 Reply

    “iDeneb v 1.4 10.5.6 Available for Download” Where is the download, you show have included it in your post.

  9. AW April 1, 2010 Reply

    Ok so, will this work with my gateway t-1622 series laptop? AMD Turion 64 , and i run Ubuntu 9.10 on it.
    im going to keep the ubuntu partition on my Hard drive and im going to make a new one IF it works (the installation)

    ive tried kalyway before but didnt work, it always got stuck on the white apple screen with a spinning orb, ive tried installing with kalyway more then 5 times (seriously!)

    but will ideneb work?

    MAY SOME ONE PLEASE HELLP ? thank youu

    btw if you wanna contact me by email… info@applewire.tk

  10. Mark March 16, 2010 Reply

    Hi,

    ‘Just installed iDeneb v1.5.1/10.5.7 on my Samsung NC10.
    Everything checks out ok, but my wireless card has not
    been recognised. It is an Atheros AR242x802.11 a/b/g
    Wireless PCI Express Adaptor. I have checked the relevant
    box for NC10 netbook Install, but still nothing, any help
    would be greatly appreciated.

    Thanks in advance – Mark

  11. Matt March 4, 2010 Reply

    Were do you download ideneb? What website has a good copy?

  12. Superwuppy January 30, 2010 Reply

    Hi

    can anyone help me with a walkthru

    my specs:

    Intel core2Quad Q6600
    Asus P5Q-Pro
    4×1 GB OCZ platinum 1066mhz intel optimized
    Maxtor 320GB HDD
    2 x optiarc DVD/DL/RW 8xspeed

    after installing with vanilla — dubble panic
    after installing Voodoo with cpus=1 start-up hangs after initializing befor mounting
    voodoo without cpus=1 also hangs at that point
    and it shows my procc.speed and cores 3600 ghz fsb 1600

    even with the use of seatbelt fix it stil hangs there .

    vanilla , AnV , and the others give a dubble panic.

    please help me cause it worked with my previous pc running AMD

  13. bhupesh January 22, 2010 Reply

    hi
    i have celeron 2.0ght with 512mb of ram.

    i installed ideneb but when i start my computer it doesn’t boot
    plz tell me the solution..

    thanks in advance

  14. Bill November 20, 2009 Reply

    Just installed iDeneb v1.5.1 10.5.7 on my Acer Aspire 5720 no problems with it installing and booting up,(looks great) problem i have No Sound and the 802.11a/b/g Wlan WiFi not working need the drivers ? can any one point me in the right directions

  15. marcos November 11, 2009 Reply

    Can anyone please help me and tell me if this will work wtih my gateway lt Netbook.Hoping to get this finally started and running. Thanks for your time supporters!!

  16. umair October 31, 2009 Reply

    im having sum problem during installation of Macosx 10.5.8 :(
    Intel Core 2 Duo E7400
    Mother Board Intel Dp45sG
    DDR3: 2GB
    Graphic Card 9400Gt
    Sony Rom: Sata
    please tell me the solution how to install it please
    mairkhan@gmail.com
    arbab.umair@hotmail.com :)

  17. Rich October 7, 2009 Reply

    Just go here.>>>>>>>http://www.insanelymac.com/forum/index.php?showtopic=172593

    and remember this is not to encourage bootleg software this is so you can get a feel of the best OS on the market. then go buy a real Mac i own a imac 24 Awesome machine. so remember when you get that nice income tax check go ahead you deserve it…splurge on you’re self. I did……

  18. alex September 13, 2009 Reply

    How Can I Download IDeneb Free

  19. abi June 30, 2009 Reply

    “If your system’s sound does not work even after installing the proper sound drivers there may be an issue with the System Preferences. Go to System Preferences Sound > Output > and make sure that “Internal Speakers” is chosen and not Headphones or something else”

    But mine says “there is no output device”, what shall I do? Please help me fix my sound.

  20. rockie June 9, 2009 Reply

    where can i download ideneb v 1.4 10.5.6 with its update patch to 10.5.7 please help with this

  21. noArk June 8, 2009 Reply

    I have the same problem with Aspire one a150 will someone can give me a list for choosing the pathes?

  22. AceR2D2 June 3, 2009 Reply

    I’m having the same issue as Tom. Installed using only essentials and Aspire One package on a D150 (10.1, 160 GB HDD, IDE mode for SATA controller). Tried options -f and -x upon first boot. Hangs at Grey screen. Anyone with a successful 150 install want to post a walk through or methodology?

  23. stick3r8 June 1, 2009 Reply

    Is this work with my system?

    HP Pavilion DV 6899ee
    - System Processor – Intel Core 2 Duo T9300 (2.5 GHz)
    - Memory – 2048 DDR2 SDRAM
    - HD – 250 Toshiba Mk256 GSX
    - WLAN & BT – Intel Pro/Wireless 3945 b/g 802.11b/g Wlan and Bluetooth
    - Video – NVidia Geforce 8400 GS w/ 256mb DDR Dedicated
    - LAN – RealTek RT8101 Ethernet PCI-E FastEthernet NIC (NDIS 6.0)
    - Sound – Realtek High Defination Audio
    - Modem – Motorola SM56 Data Fax modem
    - IEEE – Ricoh OHCI Complaint IEEE 1394
    - 5 in 1 Digital Media Reader – Ricoh SD/MMC, MS, XD
    - HP Webcam.

    I installed the iDeneb 10.5.5, but gets some problem, after i finished installing the leo, when it boots up to the final registration, it hang up and never continue. any idea?

  24. harakiri May 31, 2009 Reply

    i have aao a150 and same problem. it freezes on start-up

  25. znn May 25, 2009 Reply

    i tried to install it on my acer aspire one – i can install it but after succesful installation it freezes in the configuration phase. it plays the sound (after i reboot it) & after that nothing- the background & the busy rainbow mouse!

    how to fix this problem?

  26. adrian May 20, 2009 Reply

    a PC with amd turion 64 x2 iDeneb works?

  27. Piergiorgio May 16, 2009 Reply

    I have the same problem (screen freeze) on NC10.

    Still wonder why….

  28. msi gx720 help May 8, 2009 Reply

    Hey Jax Dryke,

    I have a MSI GX720 and can’t get it to work.
    Can you send a link to a step by step install, please?

  29. tav April 22, 2009 Reply

    no hay download

  30. Bela April 16, 2009 Reply

    Hi!

    Strange, or not, I can’t install on my laptop (Acer Aspire 5002WLMI, AMD Turion 64)
    Why, why? It can’t boot from dvd.
    Any idea?

  31. Jax Dryke April 10, 2009 Reply

    That’s strange,

    on every laptop, computer or netbook I try to install it, it works perfectly. I wonder why everyone else has so much probs getting it running ..

    Right now it’s running amazingly good on my MSI GX720 (laptop).

  32. Tom March 3, 2009 Reply

    hi

    I have a Acer aspire one A150 and after the installation ,
    the Apple screen freezes to , but I can start safe boot white -x,
    but that is without driver :S
    ————————————————————
    Acer aspire one A150 ( mac book nano :P )
    installing: Mac os x 10.5.6 (iDeneb)

  33. ssd February 18, 2009 Reply

    Acer A150 and MSI Wind installations don’t work – Screen freeze on start-up.

Leave your comment here